Levelers
Calculate clips and wedges for leveling
How the calculation works
Pick the tile dimensions and joint width, then enter the area. The calculator looks up how many levelling clips are needed per m² for that format, multiplies by the area and works out wedges and packs.
Formula and assumptions
Clips = area × clips per m² (depends on tile format), rounded up. Wedges = clips ÷ 3, rounded up. Packs are rounded up. The per-m² figure is an indicative value from the table in the app, not a system manufacturer's specification.
Worked example
Area 20 m², tile 60 × 60 cm: the table gives 11 clips/m². Clips 20 × 11 = 220. Wedges 220 ÷ 3 = 73.3 → 74.
What affects real consumption
- Larger formats need fewer clips per m² but a flatter substrate.
- Offset (e.g. 1/2) laying needs more clips at the joints.
- Cuts along walls and the joint width change the real count.
Frequently asked questions
What are levelling clips and wedges?
A system that aligns the edges of neighbouring tiles while the adhesive sets; the clip stays in the joint and the wedge is removed after curing.
Should I add a reserve?
Yes – some clips break or get lost when removed. A few percent extra is common, but it depends on your system and experience.