Guides to building walls and plastering

A wall is built twice: first from blocks or bricks, then it is plastered in one or two coats. This category contains guides and tips for both jobs. Find out how many blocks go into a square metre of wall, how much mortar or thin-bed adhesive you need and how windows and doors are deducted from the area. Tips explain why the first course matters most and why mortar should never be mixed by eye.

For plastering, the page describes plaster consumption per square metre for different layer thicknesses, the difference between lime-cement and gypsum plaster and the role of corner beads and a bonding coat on smooth concrete. The work steps lead from preparing the background and setting screeds to the final smoothing and drying. You will also find common mistakes, such as plastering over a dirty background or applying too thick a coat in one pass, and instructions for entering a flat room by room. Open the masonry or plastering calculator to calculate bricks for the wall, bags of plaster and beads with packs and a reserve.

Open the calculator: Masonry

Other calculators in this category: Plastering calculator

Tips

Step by step: Masonry

  1. Mark out the walls and openings on the base.
  2. Lay the damp-proof course and level the first course in mortar.
  3. Mix mortar or adhesive to suit the block type.
  4. Build in bond, staggering the vertical joints between courses.
  5. Check with a spirit level and plumb line every few courses.
  6. Install lintels over openings and fill the joints as instructed.

Step by step: Plastering calculator

  1. Clean the wall of dust and loose render and dampen it if needed.
  2. Apply a primer or a spatterdash coat suited to the substrate.
  3. Fix screeding rails and corner beads true and plumb.
  4. Mix the plaster with water as the product instructions say.
  5. Apply the coat, rule it off along the rails and smooth it.
  6. Let it dry slowly, away from draughts and direct sun.

Quick tips for your calculation

  • Apply plaster thicker than about 2 cm in two coats with drying time between them; plaster consumption per m² grows with thickness. Learn more
  • Fix corner and edge beads before plastering: straight corners and reveals save time and material.
  • The first course decides the whole wall: level it in mortar and check it with a spirit level before you continue.
  • Mortar use depends on joint thickness and block type – ground blocks for thin-bed mortar use far less than a traditional joint. Learn more

Common mistakes

All common building mistakes

How to use the calculator

  • 1. Enter the length and height of the wall
    2. Select the block type (dimensions)
    3. Select the bonding method (cement mortar, adhesive)

    The calculator works out:
    • Number of blocks
    • Amount of mortar/adhesive
    • Reinforcement mesh for bonding
  • 1. Add rooms and draw or enter their outline.
    2. Mark the walls and ceiling you plaster and add doors and windows.
    3. Choose plaster type and thickness for walls and ceiling.
    4. Optionally include primer, skim coat and paint.
    5. Check the plan and materials list, then download the PDF.

All guide categories · Frequently asked questions about the calculators