Staircase guides: dimensions, pitch and building a stair
Comfortable stairs depend on dimensions rather than materials: riser height, tread depth, pitch and enough headroom. This category contains a guide that explains how to work out the number of steps from the floor-to-floor height and the available length, how the step rule 2R + G is applied and which pitch suits a staircase in a house, a basement or on a terrace. Tables of typical dimensions and worked examples are included.
The short tips shown with the calculator remind you of the step rule and the minimum headroom under the ceiling, and the list of common mistakes shows what happens when you measure only once or load concrete stairs too early. You will also learn how to measure the space for stairs before entering it in the calculator: the height from finished floor to finished floor, the length on plan and the width of the flight. The stair calculator then works out the number and height of risers, the going, the pitch and a 2D drawing for straight, L-shaped, U-shaped, winder and spiral stairs, with PDF export. Always check the measurements on site once more before ordering material.
Open the calculator: Staircase Calculator
Guides
- How to Calculate Stairs: Number of Steps, Riser Height and Tread Depth – How many steps does a staircase need, and how high and deep should each one be? Start from the floor-to-floor height, apply the 2h + b = 63 cm rule and check the result in the calculator.
Quick tips for your calculation
- Comfortable stairs follow the step rule: two risers plus one going add up to about 63 cm. Learn more
- Check headroom along the whole flight – a beam or ceiling edge above the stairwell is a common mistake. Learn more
- Before gluing stair cladding, dry-lay the treads and risers and number them: you see where the cuts go and keep every nosing overhang the same.
Common mistakes
- One measurement per wall – Measure at two heights and check the diagonals.
- Ordering concrete too tight – Measure the real dimensions and add a 5–10% reserve to the concrete volume.
- No curing of concrete – Keep the concrete wet or covered with sheeting for at least the first few days.
How to use the calculator
- Required measurements:
1. Total height (H) - from finished floor to finished floor of the upper storey
2. Available length (L) - space for the stairs in plan
3. Stair width - minimum 80 cm for residential spaces
The calculator automatically calculates the optimal tread and riser dimensions.
All guide categories · Frequently asked questions about the calculators