Sealants & crack repair

Quick answer: A 10 m joint 10 mm wide and 6 mm deep holds 600 ml of sealant: with 10 % extra that is 3 cartridges of 310 ml. A 12 m silicone corner bead (8 × 8 mm) needs 2 cartridges.

Silicone, acrylic, PU sealant and foam per metre of joint, backer rod, masking tape, plus repair mortar and mesh tape for cracks

How the calculation works

The caulk and silicone calculator takes each joint volume as length × width × depth (1 m × 1 mm × 1 mm = 1 ml), half for a triangular corner bead. The total per sealant type (silicone, acrylic, PU or hybrid sealant) is divided by the cartridge volume, and PU foam by the can yield. For each joint it suggests a depth from the rule width : depth ≈ 2 : 1 and a backer rod about 25 % wider than the joint. Crack mode works out repair mortar or filler and mesh tape, and for injection it asks for the consumption from the data sheet.

Inputs and units

  • Joints: sealant type, shape (butt or corner bead), length in m, width and depth in mm, backer rod
  • Cartridge volume (default 310 ml), foam can yield in litres (default 35 l) and extra in %
  • Masking tape (2 × joint length), optional primer in ml per metre
  • Cracks: length, width and depth after opening, fill or injection, mortar density and bag size

Formula and assumptions

Volume (ml) = length (m) × width (mm) × depth (mm); corner bead × ½. Cartridges = ⌈Σ volume × (1 + extra) ÷ cartridge volume⌉. Foam = ⌈volume (l) × (1 + extra) ÷ yield⌉. Backer rod ≈ 1.25 × width. Crack: mass = L × w × d × (1 + extra) × density.

Worked example

Bathroom: silicone along the bath 12 m (8 × 8 mm) = 384 ml → 2 cartridges; acrylic along door frames 15 m (10 × 6 mm) = 900 ml → 4 cartridges and 16.5 m of 13 mm backer rod; masking tape 54 m (2 rolls of 50 m). Cracks of 3 m (6 × 10 mm) and 2 m (10 × 10 mm): 0.71 kg of mortar and 5.5 m of mesh tape.

Rule of thumb for movement joints

Joint widthDepthNote
6–12 mmequal to width, at least 6 mmnarrow joint up to 1 : 1
12–40 mmhalf the widthratio ≈ 2 : 1
over 40 mmper data sheetthe calculator warns
Backer rod≈ 1.25 × widthrounded up

What affects real consumption

  • Actual joint width and depth – a small change in depth changes the volume a lot.
  • Losses in the gun and nozzle and reworked spots.
  • Foam yield depends on temperature, humidity and gap width.

Common mistakes

  • Sealant bonded on three sides because there is no backer rod.
  • Rigid mortar in a crack that is still moving.
  • A joint too deep or too shallow for its width.

Limits of the calculation

  • The calculator only gives quantities; it does not assess the cause of cracks or load-bearing capacity.
  • It does not guarantee watertightness – the joint system and sizes come from the sealant data sheet.
  • Nothing is assumed for injection: the user enters consumption and packer spacing.
  • Joint movement is not calculated; expansion joints in floors and facades are designed by a professional.

Frequently asked questions

How much silicone per metre of joint?

Length in m × width in mm × depth in mm gives ml. A 10 × 6 mm joint uses 60 ml per metre, so a 310 ml cartridge fills about 5 m.

How deep should a sealant joint be?

The rule of thumb for movement joints is width : depth ≈ 2 : 1 with a depth of at least 6 mm; narrow joints up to 12 mm may be as deep as they are wide.

What size backer rod do I need?

A round closed-cell rod about 25 % wider than the joint, e.g. 13 mm for a 10 mm joint. It stops the sealant bonding to the bottom of the joint.

How much does one can of expanding foam fill?

The yield is printed on the can and depends on conditions; the calculator starts with 35 l of filled volume and lets you change it.

How do I repair a crack in a wall?

Open and clean the crack, fill it with repair mortar or filler and embed mesh tape over it. From length, width and depth the calculator gives kilograms and bags.

When should a professional look at a crack?

When it is wider than about 5 mm, keeps growing or reopens. Such a crack should be assessed before repair; the calculator does not assess load-bearing capacity.

Related calculators

Publisher: Art-Visum d.o.o. · Content reviewed:
Calculations use common consumption rates and manufacturers' technical data sheets; results are estimates. Methodology · Standards · About