Guides to measuring rooms, area, volume and converting units
Every material calculation starts with an accurate measurement. This category brings together tools and guides for measuring and for converting units. The room measurement tool calculates the net area of walls, floor and ceiling without doors and windows, and the area and volume calculators cover rectangles, triangles, circles, cuboids and cylinders. The guide on converting m² to m³ shows how to get the volume of a layer of concrete, screed or fill from its area and thickness.
The unit converter handles length, area, volume, mass, pressure, temperature, energy and many other quantities, including old units such as the fathom and the acre. Guides explain paper sizes for building drawings at 1:50 and 1:100 scale and machine power in kW, PS and hp. The cutting plan arranges the parts you need on stock lengths with the least waste. The instructions show how to choose a volume shape, swap the conversion direction and why a part cannot be cut even though it is shorter than the bar, while common mistakes warn about forgotten openings and measuring only once. Measured values can be passed straight to the material calculators.
Open the calculator: Measure a Space
Other calculators in this category: Surface Areas · Volume · Unit Converter · Cutting plan
Guides
- m² to m³: how to work out the volume of a layer of concrete, screed or fill – Quick answer: m³ = area (m²) × layer thickness (m). For 20 m² and a 5 cm layer: 20 × 0.05 = 1 m³. Divide a thickness in cm by 100 and in mm by 1000.
- Paper sizes for construction drawings: A0–A4 sheets and drawing scale – Quick answer: plans and sections are most often printed on A3 (297 × 420 mm) or A1 (594 × 841 mm). At 1:100 an A3 sheet shows up to 29.7 × 42 m of real space, and at 1:50 up to 14.85 × 21 m.
- Power of machines and tools: kW, hp and PS in practice – Quick answer: multiply power in kW by 1.34 to get hp, or by 1.36 for metric horsepower (PS); 1 PS = 0.7355 kW. A 15 kW mini excavator has about 20.4 PS, and a 75 kW machine about 102 PS.
Quick tips for your calculation
- Always include the saw kerf in a cutting plan; with several cuts per bar a few millimetres add up.
- When calculating wall area, subtract doors and windows, and add the reveals if you finish them too.
- To calculate cubic metres, multiply the area in m² by the thickness in metres – for example 20 m² × 0.10 m = 2 m³. Learn more
- Measure each wall at two heights and check the diagonals; rooms rarely have perfectly square corners.
Common mistakes
- One measurement per wall – Measure at two heights and check the diagonals.
- Forgotten openings and reveals – Subtract openings and add reveals separately.
- Roof area taken from the floor plan – Calculate area along the slope, with overhangs and overlaps.
- Spoil removal without bulking – Plan haulage by the loose (bulked) volume.
- Ordering concrete too tight – Measure the real dimensions and add a 5–10% reserve to the concrete volume.
- Cutting plan without saw kerf – Enter the tool's kerf width in the cutting plan.
How to use the calculator
- Available shapes:
• Cube/Cuboid - for pits, foundations
• Cylinder - for wells, columns
• Sphere - for tanks
• Cone - for slopes, pyramids
• Prism - for inclines
Enter the dimensions and get the volume in m³ or litres. - 1. Open the Unit Converter and in the “Measurement type” menu choose what you are converting, e.g. length, pressure or temperature. Types are sorted into groups, and there is a search field at the top of the menu.
2. Enter the value. The decimal separator can be a comma or a point, and spaces are ignored; “1.000,5” and “1,000.5” are both read as 1000.5. Negative numbers are accepted only where they make sense, e.g. temperature, angle or voltage.
3. Choose the units in “From unit” and “To unit”. Units are grouped: metric, imperial/US, traditional units for the app language and “Other regions”.
4. The result appears immediately, with no calculate button.
The page for a particular type (e.g. Pressure or Angle and slope) opens the converter directly with that type. - • The arrow button between “From unit” and “To unit” swaps the units. The previous result becomes the new value, so you immediately see the conversion in the opposite direction.
• The “Copy” button next to the result copies the number together with the unit symbol (e.g. 2.54 cm), ready to paste into a message or spreadsheet.
• After copying, a “Copied” confirmation appears; if the device does not allow copying, an error message is shown.
Values in the table are copied with the button at the end of each row. - 1. In the “Measurement type” menu choose length, area, volume or mass.
2. In “From unit” choose the old unit. Traditional units for the app language are in the “Traditional – …” group, and units of other countries and periods are in “Other regions”. The quickest way is to type the name into the search field, e.g. “fathom”.
3. Choose a metric target unit, e.g. metre, litre or kilogram.
The “Old units” page opens a conversion from an old unit to metric with all units shown, followed by reference tables of old units by type with their values in SI units.
The ≈ mark means the unit's value varied by region or period; the usual value for the stated region or variant is shown. Sources are listed below the table. - The “Square klafter to m²” page opens an area conversion with the pair square klafter (čhv) → m², so you only need to enter the number of square klafters, e.g. from an old land register extract.
Below the converter there is a table of old land units (cadastral yoke, Hungarian yoke, ral, dunam and others) with their value in m², hectares and square klafters.
For the opposite direction (m² to čhv) use the swap button. For official and legal purposes, check the value in the original document. - For structural work, building services and product data sheets, choose a type from the “Mechanics and statics” or “Flow and viscosity” group.
• Pressure and stress: 1 N/mm² = 1 MPa = 10 bar; concrete strength and system pressure are converted in the same type.
• Force: 1 kN ≈ 102 kgf (kilopond, 9.80665 N).
• Torque: bolt tightening torque in N·m, kgf·m or lbf·ft.
• Density: kg/m³, g/cm³, t/m³ or lb/ft³ (1 g/cm³ = 1000 kg/m³).
• Volumetric flow: 1 m³/h ≈ 16.67 L/min ≈ 0.278 L/s; GPM and CFM are available for pumps and ventilation. Mass flow and viscosity are separate types.
Most of these types also have their own page with examples. - • Temperature: scales are converted by an offset and a factor (°F = °C × 9/5 + 32), so 0 °C is not 0 °F. For a temperature difference, e.g. the ΔT of a heating system, choose “Temperature difference”: 1 K = 1 °C = 1.8 °F.
• Thermal conductivity λ: W/(m·K), mW/(m·K) and the imperial k-value.
• Thermal resistance R and U-value: U = 1/R; US R-values (ft²·°F·h/BTU) are converted as well.
• Energy: 1 kWh = 3.6 MJ; kcal, BTU and toe are also available.
• Power: kW, metric hp and HP, BTU/h and kcal/h (1 kW ≈ 1.36 metric hp).
For insulation thickness and heating or cooling capacity, use the dedicated calculators. - The start trim with its cut and the end trim must be added to the part length. Example: 3000 mm bar, start and end trim 20 mm each, 3 mm kerf – the longest part is 2957 mm.
All guide categories · Frequently asked questions about the calculators