Paper sizes for construction drawings: A0–A4 sheets and drawing scale
Quick answer: plans and sections are most often printed on A3 (297 × 420 mm) or A1 (594 × 841 mm). At 1:100 an A3 sheet shows up to 29.7 × 42 m of real space, and at 1:50 up to 14.85 × 21 m.
Real size = size on the drawing × scale denominator: 1 cm at 1:100 is 1 m, and at 1:50 it is 0.5 m. See all paper sizes
| Size | mm | 1:50 (m) | 1:100 (m) |
|---|---|---|---|
| A4 | 210 × 297 | 10.5 × 14.85 | 21 × 29.7 |
| A3 | 297 × 420 | 14.85 × 21 | 29.7 × 42 |
| A2 | 420 × 594 | 21 × 29.7 | 42 × 59.4 |
| A1 | 594 × 841 | 29.7 × 42.05 | 59.4 × 84.1 |
| A0 | 841 × 1189 | 42.05 × 59.45 | 84.1 × 118.9 |
Choose scale and sheet size together
First choose the scale the drawing needs to stay legible – details at a larger scale, plans and sections usually 1:50 or 1:100 – then the smallest sheet the drawing fits on. The table shows the largest real area a sheet can show; the border and title block take part of the sheet.
Common sheet sizes
All A-series sheets share the same aspect ratio, so a drawing can move from one size to another without distortion.
- A4 (210 × 297 mm): details, bills of quantities and folded copies of drawings.
- A3 (297 × 420 mm): flat or house floor plans, site drawings.
- A1 and A0: design documentation and large plans.
Printing on a smaller sheet changes the scale
An A1 drawing can be printed on A3, but every dimension becomes 2 times smaller: a drawing at 1:50 becomes 1:100. On a reduced print, measure only with the new scale or from the dimensions.
Frequently asked questions
Which paper size for a flat floor plan?
Usually A3 (297 × 420 mm) at 1:100 or 1:50; at 1:100 the sheet shows up to 29.7 × 42 m.
How much is 1 cm on a drawing at 1:100?
1 m in reality; at 1:50 it is 0.5 m.
What happens to the scale if I print an A1 drawing on A3?
Every dimension shrinks 2 times, so 1:50 becomes 1:100.
Which scales are used for construction drawings?
Site plans 1:500–1:200, floor plans and sections 1:100 or 1:50, details 1:20–1:5.
How big is an A1 sheet?
594 × 841 mm; A0 is 841 × 1,189 mm and A2 420 × 594 mm.
How do I measure a length on a 1:50 drawing?
Measure in mm and multiply by 50: 84 mm on the drawing = 4,200 mm = 4.2 m in reality.
Tools for this job
All guides and tips in this category: Measuring and units
More guides
- How to Calculate Stairs: Number of Steps, Riser Height and Tread Depth
- Self-Levelling Compound per m²: Calculation by Area and Layer Thickness
- Paint Consumption per m²: How Much Paint for Walls and Ceiling
- How to Calculate Facade Area, ETICS Materials and Quantities
- How Much Putty per m²: Skim Coat Consumption for Walls and Ceilings
- Tile Layout Planning: Where to Start Tiling Without Thin Cuts at the Wall
- Floor Preparation and Tiling: Which Tool When
- How many fence posts do I need? Posts, bays, mesh, panels and concrete
- Air conditioner size per m² and m³: how to calculate kW and BTU/h
- How many tiles do I need: pieces, waste allowance, adhesive and grout
- Concrete quantity guide: cubic metres, allowance, cement, aggregate and water
- Drywall materials: boards, profiles and screws per m²
- m² to m³: how to work out the volume of a layer of concrete, screed or fill
- Power of machines and tools: kW, hp and PS in practice