Power of machines and tools: kW, hp and PS in practice
Quick answer: multiply power in kW by 1.34 to get hp, or by 1.36 for metric horsepower (PS); 1 PS = 0.7355 kW. A 15 kW mini excavator has about 20.4 PS, and a 75 kW machine about 102 PS.
1 kW = 1.34 hp = 1.36 PS; 1 hp = 0.7457 kW, 1 PS = 0.7355 kW. Convert kW, hp and PS
| kW | PS (metric hp) | hp |
|---|---|---|
| 0.75 | 1.02 | 1.01 |
| 1.5 | 2.04 | 2.01 |
| 2.2 | 2.99 | 2.95 |
| 4 | 5.44 | 5.36 |
| 7.5 | 10.2 | 10.06 |
| 15 | 20.39 | 20.12 |
| 37 | 50.31 | 49.62 |
| 75 | 101.97 | 100.58 |
PS, CV and hp are not the same unit
PS (CV, ch) is metric horsepower of 735.5 W, while hp is mechanical (imperial) horsepower of 745.7 W. The difference is small, but in data sheets of imported machines hp and PS are not the same number: 1 hp = 1.0139 PS.
Power on the rating plate of machines and tools
An electric motor's rating plate shows the rated shaft power in kW. Hand-held power tools often state the input power in watts, which is higher than the useful power at the tool. Compare machines using the same kind of figure.
Power is not energy use
kW is power and kWh is energy: a 2.2 kW mixer running at full load for 3 hours uses up to 6.6 kWh. Work out energy and electricity bills in kWh.
Frequently asked questions
How many PS is a 75 kW machine?
About 102 PS (75 × 1.36).
How many kW is a 100 PS engine?
100 × 0.7355 = 73.5 kW.
Is hp the same as PS?
No: 1 hp = 745.7 W and 1 PS = 735.5 W, so 1 hp = 1.0139 PS.
How many kW is a 20 hp mini excavator?
20 × 0.7457 ≈ 14.9 kW; if the 20 is in PS, 20 × 0.7355 = 14.7 kW.
Is the rated power of a tool its input or output?
For electric tools the rating is usually the electrical input power; the useful output at the spindle is lower. Engines are rated by their output.
How many kW does a concrete mixer use?
Small site mixers of 120–180 L usually have motors of about 0.5–0.9 kW and run on an ordinary socket.
Tools for this job
All guides and tips in this category: Measuring and units
More guides
- How to Calculate Stairs: Number of Steps, Riser Height and Tread Depth
- Self-Levelling Compound per m²: Calculation by Area and Layer Thickness
- Paint Consumption per m²: How Much Paint for Walls and Ceiling
- How to Calculate Facade Area, ETICS Materials and Quantities
- How Much Putty per m²: Skim Coat Consumption for Walls and Ceilings
- Tile Layout Planning: Where to Start Tiling Without Thin Cuts at the Wall
- Floor Preparation and Tiling: Which Tool When
- How many fence posts do I need? Posts, bays, mesh, panels and concrete
- Air conditioner size per m² and m³: how to calculate kW and BTU/h
- How many tiles do I need: pieces, waste allowance, adhesive and grout
- Concrete quantity guide: cubic metres, allowance, cement, aggregate and water
- Drywall materials: boards, profiles and screws per m²
- m² to m³: how to work out the volume of a layer of concrete, screed or fill
- Paper sizes for construction drawings: A0–A4 sheets and drawing scale