Drywall materials: boards, profiles and screws per m²
Short answer: boards = area ÷ area of one board × (1 + allowance), rounded up; profiles, screws, tapes and joint compound are calculated from consumption rates per m². For a 50 m² ceiling with 1200 mm wide boards and a 10 % allowance that is 23 boards, 55 CD profiles of 3 m and 850 screws. Here is how ceilings and partition walls are calculated, with examples from the drywall calculator.
1. Type of work and area
The calculator distinguishes a ceiling, a partition wall, wall lining and joint finishing only – the profiles and consumption rates depend on it. For a partition wall, enter the area of one side only; the calculator itself accounts for both sides and the number of layers. A common mistake is entering both sides, which doubles the material twice.
2. Number of boards
A board is 2 m long, so a 1200 mm wide board covers 2.4 m². Boards = area ÷ 2.4 × (1 + allowance), rounded up; for a partition wall it is multiplied by 2 sides and the number of layers. A 50 m² ceiling with 10 %: 50 ÷ 2.4 × 1.1 = 22.9, so 23 boards. A partition wall of 10.8 m² per side, 1 layer, 10 %: 10.8 ÷ 2.4 × 1.1 = 4.95, so 5 boards per side and 10 in total.
3. Profiles and screws for a ceiling
For a ceiling the calculator uses CD profile 3 m/m², UD profile 0.5 m/m² and TN screws 17 pcs/m². Profiles and boards are increased by the allowance, while screws, tapes and compound follow the rate per m² and are rounded up to whole packs.
| Ceiling area (m²) | Boards | 3 m CD profiles | TN screws (pcs) |
|---|---|---|---|
| 10 | 5 | 11 | 170 |
| 20 | 10 | 22 | 340 |
| 30 | 14 | 33 | 510 |
| 50 | 23 | 55 | 850 |
| 100 | 46 | 110 | 1700 |
4. Example: an 18 m² ceiling
With a 5 % allowance: boards 18 ÷ 2.4 × 1.05 = 7.88, so 8 boards; CD profile 18 × 3 × 1.05 = 56.7 m, so 19 profiles of 3 m; UD profile 18 × 0.5 × 1.05 = 9.45 m, so 4 profiles of 3 m; TN screws 18 × 17 = 306 pieces, so 1 box of 500.
5. Tapes, joint compound and packaging
The tape type (mesh or paper) and the compound pack size (for example 20 kg) determine the material list and the number of packs. Packs = quantity ÷ pack size, rounded up. That is why the ordered quantity almost always differs from the calculated one.
6. Common mistakes and limits
- Too small an allowance when there are many openings, corners and cuts – openings and doors are not calculated separately.
- Treating consumption rates as exact; the exact profile spacing and accessories are set by the system manufacturer.
- Structural, fire and acoustic requirements are not checked – for such walls and ceilings the instructions of a certified system apply.
- Boards are calculated from area, not from a layout; for very tall walls or boards of a different length the count may differ.
Frequently asked questions
How many boards for a 50 m² ceiling?
With 1200 mm wide boards (2.4 m²) and a 10 % allowance: 50 ÷ 2.4 × 1.1 = 22.9, so 23 boards.
How many screws per m² of ceiling?
The calculator uses 17 TN screws per m²; for 50 m² that is 850 pieces, i.e. 2 boxes of 500.
Do I enter the area of one or both sides of a partition wall?
One side only. The calculator itself accounts for both sides and the number of layers.
How far apart are CD profiles in a ceiling?
The calculator’s norm of about 3 m of CD profile per m² corresponds to a common grid with bearing profiles roughly 40–50 cm apart for 12.5 mm boards.
Should ceiling boards run lengthwise or crosswise?
Usually crosswise to the bearing profiles, with end joints staggered by at least one profile spacing. This does not change the number of boards.
Which board thickness for walls and ceilings?
12.5 mm is the standard; 15 mm or double layers are used for higher fire or sound requirements, and impregnated boards in wet rooms.
Open the calculator: Drywall calculator
All guides and tips in this category: Drywall
More guides
- How to Calculate Stairs: Number of Steps, Riser Height and Tread Depth
- Self-Levelling Compound per m²: Calculation by Area and Layer Thickness
- Paint Consumption per m²: How Much Paint for Walls and Ceiling
- How to Calculate Facade Area, ETICS Materials and Quantities
- How Much Putty per m²: Skim Coat Consumption for Walls and Ceilings
- Tile Layout Planning: Where to Start Tiling Without Thin Cuts at the Wall
- Floor Preparation and Tiling: Which Tool When
- How many fence posts do I need? Posts, bays, mesh, panels and concrete
- Air conditioner size per m² and m³: how to calculate kW and BTU/h
- How many tiles do I need: pieces, waste allowance, adhesive and grout
- Concrete quantity guide: cubic metres, allowance, cement, aggregate and water
- m² to m³: how to work out the volume of a layer of concrete, screed or fill
- Paper sizes for construction drawings: A0–A4 sheets and drawing scale
- Power of machines and tools: kW, hp and PS in practice