How many tiles do I need: pieces, waste allowance, adhesive and grout

Short answer: required area = net area × (1 + waste allowance), and tiles = required area ÷ area of one tile, rounded up. For a 4 × 5 m room (20 m²) with 60 × 60 cm tiles and a 5 % allowance that is 21 m² and 59 tiles. Below are the steps, the allowance per laying pattern, adhesive, grout, packaging and common mistakes, with examples calculated by the tile calculator.

1. Measure and add up the areas

Measure every surface separately: the floor, each wall, each reveal. The area of a rectangular surface is length × width in metres. Leave out openings that are not tiled (doors, windows, a bathtub against the wall). The calculator adds up all entered surfaces, so you do not need to sum them by hand.

Do not add the allowance to your measurements – it is added once, in the next step. Adding it twice means buying too many tiles.

2. Waste allowance by laying pattern

The allowance covers cuts along walls and openings, breakage and future repairs from the same batch. The calculator adds it to the area before calculating pieces, adhesive and grout: straight laying +5 %, diagonal +10 %, complex patterns +15 %.

Laying patternAllowance20 m² becomes
Straight5 %21 m²
Diagonal10 %22 m²
Complex15 %23 m²

3. Number of tiles and boxes

Tiles = required area ÷ area of one tile, rounded up. A 60 × 60 cm tile is 0.36 m²: 21 ÷ 0.36 = 58.3, so 59 pieces. For 13.2 m² (a 3 × 4 m room with 10 %) and 30 × 30 cm tiles (0.09 m²): 13.2 ÷ 0.09 = 146.7, so 147 pieces.

Tiles are sold in boxes. If you enter m² per box, the calculator also rounds up to whole boxes, so you see what you actually buy. A count based on area does not reflect the real cutting layout – for an exact cutting plan use the Tile Planner.

4. Adhesive

The calculator uses 5 kg/m² of adhesive for smaller formats and 6 kg/m² when a tile side is 60 cm or more, because large tiles need better adhesive coverage. The amount is rounded up to 25 kg bags. Example: 21 m² × 6 kg/m² = 126 kg, so 6 bags (150 kg). For 13.2 m² of 30 × 30 cm tiles: 13.2 × 5 = 66 kg, so 3 bags.

This consumption assumes a flat substrate and a standard notched trowel. Unevenness is corrected with self-levelling compound, not with a thicker adhesive bed.

5. Grout

Grout consumption = joint width × (a + b) ÷ (a × b) × 1.6 kg/m², where a and b are the tile sides in cm. Narrower joints and larger formats use less grout. For a 60 × 60 cm tile and a 3 mm joint: 3 × 120 ÷ 3600 × 1.6 = 0.16 kg/m², so 21 m² needs 3.36 kg, i.e. 1 bag of 5 kg. For a 30 × 30 cm tile with the same joint, consumption doubles: 0.32 kg/m².

6. Common mistakes and limits

  • Buying without an allowance, or with too small an allowance for diagonal and complex patterns.
  • Using the same adhesive rate for every format; formats of 60 cm and larger need about 6 kg/m².
  • Forgetting to round up to whole boxes and bags.
  • Adhesive and grout rates are typical values, not data of a specific manufacturer – for a particular product its technical data sheet applies.
  • The calculator does not check whether a tile or adhesive suits the space (outdoors, underfloor heating, slip resistance).

Frequently asked questions

How many tiles do I need for 20 m²?

It depends on the format and the allowance. For 60 × 60 cm tiles and a 10 % allowance you need 22 m², i.e. 62 tiles; with 5 % it is 21 m² and 59 tiles.

How much extra tile should I buy?

The calculator offers 5 % for straight, 10 % for diagonal and 15 % for complex laying. Keep some of the spare tiles for future repairs from the same batch.

How much tile adhesive per m²?

The calculator uses 5 kg/m² for smaller formats and 6 kg/m² for tiles with a side of 60 cm or more. Check the technical data sheet of your product.

How many tiles are in a box?

It depends on the format and the manufacturer: 60 × 60 cm often 4 tiles (1.44 m²), 30 × 60 cm often 8 tiles (1.44 m²). Divide the required area by the box coverage and round up.

Are skirting tiles included?

No. Count the skirting separately by length: the room perimeter minus doorways, divided by the length of one skirting piece.

Why buy all tiles from one batch?

Shade and calibre can differ between production batches. Buy everything at once and keep a few spare tiles for repairs.

Tools for this job

All guides and tips in this category: Tiles

More guides