How much water a pool loses to evaporation and how much to top up
Short answer: an 8 × 4 m pool (32 m² of water) loses 3–7 mm of water a day to evaporation in summer, i.e. 96–224 L. With medium exposure (5 mm, 160 L a day), 20 L a day of splash-out and a weekly backwash (707 L), the pool needs about 1967 L of top-up a week, 8.54 m³ a month and 34.17 m³ for a 4-month season. A cover that cuts evaporation by 70 % brings it down to 1.5 mm (48 L) a day.
Published:
Evaporation and top-up by exposure
| Exposure | Evaporation | Per day | Top-up per week | Per month |
|---|---|---|---|---|
| Sheltered | 3 mm | 96 L | 1519 L | 6.6 m³ |
| Medium | 5 mm | 160 L | 1967 L | 8.54 m³ |
| Windy and sunny | 7 mm | 224 L | 2415 L | 10.49 m³ |
| Medium, with a cover (−70 %) | 1.5 mm | 48 L | 1183 L | 5.14 m³ |
How it is calculated
- Evaporation per day = water surface × evaporation depth: 32 m² × 5 mm = 160 L (1 mm over 1 m² = 1 L).
- Per week = (evaporation + splash-out) × 7 + backwash: (160 + 20) × 7 + 707 = 1967 L.
- Backwash of a Ø 600 mm filter: area 0.28 m² × 50 m/h × 3 min ≈ 707 L.
- Per month = per week ÷ 7 × 30.4 days; season = per month × number of months.
What reduces water loss the most
- A cover when the pool is not in use: it usually cuts evaporation by 50–90 % and also keeps the heat in.
- Wind protection (hedge, fence) – wind raises evaporation more than temperature alone.
- Backwashing only when the pressure gauge rises, not by the calendar.
- Water level in the middle of the skimmer: water that is too high overflows and splashes out.
When the loss is not evaporation
If the pool loses more than about 1 cm a day without swimming and wind, do a bucket test: put a bucket of water on a pool step so the water level in the bucket matches the pool. If after 24 h the pool drops more than the bucket, there may be a leak in the pipes, skimmer or lining.
Filling the pool
A 48 m³ pool takes about 44.4 hours to fill with an 18 L/min hose. For larger pools or low water pressure a tanker is worth it; before filling, check whether mains water may be used to fill a pool.
Sources and assumptions
An evaporation depth of 3–7 mm a day and a cover effect of 50–90 % are values common in practice for outdoor pools in summer; the real loss depends on water and air temperature, humidity, wind and sun. The backwash is calculated at about 50 m/h through the filter area for 3 minutes.
Frequently asked questions
How much water evaporates from an 8 × 4 m pool each day?
In summer 3–7 mm, i.e. 96–224 litres a day; with medium exposure about 160 L.
How much does a pool cover reduce evaporation?
Usually 50–90 %, depending on the type and how many hours it is on the pool; at 70 % evaporation drops from 5 to 1.5 mm a day.
How much water loss points to a leak?
More than about 1 cm a day without swimming and wind is worth checking with a bucket test before simply topping up.
Calculate yours: Pool Calculator